Custom Sights (Customize your sight position for each weapon)

Activity in competitions Each type of small arms has its own position of sight. Preliminary settings of the sight allow you to adjust the position on the screen so that it corresponds to the position of the sight when firing from real weapons. You can adjust the position, color and size of the sight and switch between the three presets. 📖 What allows you to do this mode you can customize the scope for each type of long range weapon. This allows you to adjust the scope for each type of weapon, adjust the position of the scope, save and load each preset. There are also presets for bows (registration slot 1 - F1) and crossbows (registration slot 2 - F2). They can also be used in competitions. Show Crosshair If you hold down the right mouse button (aiming) for about 1/3 of a second, the crosshair appears. It hides again when the right mouse button is released. Continuous Crosshair Display (F4) Press F4 to display the Crosshair continuously. Press F4 again to turn it off. Toggle sight (F5) Press F5 to turn off the aiming system completely. None of the triggers (right mouse, right Ctrl, F4) will show the sight. Press F5 again to re-enable it. Use this if you have not used a ranged weapon for a long time and do not want the scope to be displayed when blocking. Auto-Shot (create and test with a spring to avoid fuzzy aiming) (F6) Press F6 to turn on/off Auto-Shot. If auto-fire is on, right-click on the bow and release the arrow a moment before you start aiming. Release the right mouse button to reset the sight. (After each shot, wait a minute for the animation to finish and prepare the next arrow for the correct action. Otherwise, the arrow will either be fired in advance or will not be fired at all). Rotate screen position and adjust cross hair Change cross hair color (right Ctrl + Shift once) Every time you hold down the right Ctrl and press Shift, the cross hair changes to the next color from the 10-color set. Move cross hair (Ctrl + arrow keys) Ctrl + up/down/left/right arrow keys: move a point by one pixel. If the target is too high, use the up arrow key to move the crosshair up; if the target is too far to the right, move the crosshair to the right. You might think that if the target is too high, the cross-hair should be moved down, but that's not true. In other words, if the target is too low, use the down arrow key to move the crosshair down. Resize the cross hair (Ctrl + Shift + Up/Down arrow keys) Ctrl + Shift + Up = 1 pixel larger cross hair; Ctrl + Shift + Down = 1 pixel smaller cross hair; Ctrl + Shift + Up = 1 pixel larger cross hair; Ctrl + Shift + Down = 1 pixel smaller cross hair. Use when small dots or large handles are required. Save and load Shift + F1/F2/F3 settings: Save the current position, size and color of the sight in the slot. The save operation is displayed in the F1/F2/F3: Load saved settings from this slot. Refreshes the scope immediately (if the scope is visible and has not been deactivated). Overview Right mouse button or F4 displays sight; F4 keeps sight always visible; F5 globally turns sight off; F6 turns auto shooting on; F5: globally turns sight off; F6: globally turns sight off; F7: globally turns sight off; F8: globally turns sight off. (Ctrl + arrows to move the sight, Ctrl + Shift + up/down arrows to change the size of the sight, right Ctrl + Shift single click to change the color of the sight; Shift + F1/F2/F3 to save settings, F1/F2/F3 to load; F8 to exit the script; F9 to exit the script; F10 to exit the script. 🛠️ Installation and 👞 settings (This is not required, but it is recommended to run it as administrator). 2️ ⃣ The system tray will display the AutoHotkey.3️E3 icon Now hold down the right mouse button to display the sight or press F4 to always display the sight 🛑 How to stop the script Press F8 at any time to exit the script. Press F8 at any time to exit the script. In addition, right-click the AutoHotkey icon in the system tray and select Exit.