General performance improvements (ini Tweaks) - Updated for 2.0

What's that doing?

Changes the autosave interval from 5 minutes to 10 minutes (along with several other save/download settings)...

Very slightly reduces LODs for decals...

Slightly reduces the draw distance (Vanilla draw distance is a huge overdraw... You'll never see that far...)

Disables ASYNC Compute (Alternative version is available without this for modern GPUs, i.e.: GTX 10XX or newer... Although on some new cards can be worse, so you can try both options)...

Makes the game better use multiple CPU cores

The game uses GPU/VRAM better (increases the use of VRAM, but this should only be done if you have free VRAM).

An additional download file "RTX_Tweaks", which very slightly reduces the lighting and reflections of RT (the alternative version reduces them more)... This seems to give a good gain to FPS at low levels when using RT :)

Additional file "RTX_Tweaks_75Percent_Distances", which reduces some distance/trace radii RT to 75% of their values... This is done with a one-line tweak... Just change "UnitsToMeters" from 1.00 to 0.75... It is fully compatible with other tweaks that adjust the basic values (eg with my other RTX tweets)... In addition, you can easily change this value to whatever you want... Zoom in to increase distance, zoom out to decrease distance...

The optional "Res_Scaling_Tweaks" is loaded for a slight decrease in the quality of FSR/DLSS/DRS, which seems to provide a decent increase in FPS at high/low levels, without having a significant impact on the visual perception...

Additional file "Mip_Bias_Tweak", which reduces Mip Bias from 1.00 to 0.75... This will allow you to use more VRAM and provide a clearer image, and also slightly increase performance if you have a free VRAM... If you have little VRAM, try increasing the offset to 1.25-1.5 or higher...

Additionally, the file "Feature_Toggles" is downloaded, which switches some graphical functions (enable or disable), which are not too noticeable in exchange for several additional FPS... Check the file if you want to see what exactly the features are, but I suggest first try if you can see the difference in the game... Must be fun...

Additionally, you can download "Rain_Tweaks", which turns off the effects of rain Rainmap and ScreenSpace... Previously was part of the file "0Feature_Toggles" before version 1.1 of this file... Separated because it's more visible than other tweaks... People who have downloaded v1.0 should update if they want to enable these features (or remove the rain strings from the file)...

Additionally, you can download "Extreme_Feature_Toggles", which combines the above tweaks of switching functions and rain, as well as additional tweaks... Located in Miscellaneous files... For a list of tweets, see...

An additional file "Lighting_Shadows_Tweaks", which reduces some lighting and shadow settings... This will only really affect the FPS if you are limited in VRAM (or possibly in RAM/HDD speed)...

Installation:

Review known issues before proceeding with the installation.

Extract to the Cyberpunk installation main folder (for example: C:\Program Files (x86)\Steam\steamapps\common\Cyberpunk 2077).

If your processor has more than 6 threads (3Cores+3Threads, 4c+4t, 6c, 6c+6t, 8c, 8c+8t, etc.), you can download an alternative "ResourceLoaderThrottler" file which is located in the "Updates" section... First install the basic tweaks, and then install the updated file (overwriting the old file when prompted)... This will slightly decrease performance (but still be better than vanilla), but will allow you to create denser crowds if you have enough CPU/GPU resources for this...

Quick video guide to installing most CP77 mods

Uninstall:

Remove included ini files from your (e.g. C:\Program Files (x86)\Steam\steamapps\common\Cyberpunk 2077\engine\config\platform\pc) folder... All filenames will start with the digit 0 (zero)...