FSR3 Frame Gen for Cyberpunk 2077 (DLSS Enabler 2077 Edition)

Adds FSR 3.1 framing generation (replacing DLSS FG) and additional upscaling options to the game. Works with all major GPU manufacturers (Nvidia, AMD, Intel). Fully compatible with CET, RED4ext, and ReShade. Easy and fast installation.

1. Download:

For Windows 10 May 2020 Update or later (WDDM 2.7):

Check the list of supported GPUs (video cards) below and, depending on the GPU model, download the appropriate package:

'RTX/GTX' Package:

NVIDIA: GTX 8xx-9xx (Maxwell), GTX 10xx (Pascal), GTX 16xx (Turing), RTX 20xx (Turing), RTX 30xx (Ampere), RTX 40xx (Ada)

'RADEON/ARC' package:

AMD: RX 5xxx (RDNA1), RX 6xxx (RDNA2), RX 7xxx (RDNA3). RX 4xx-5xx (Polaris) and 56, 64, VII (Vega) should also work.

INTEL: Arc 5xx-7xx (Alchemist)

Installing a package that is not appropriate for your GPU manufacturer/model may break the game.

—

For Linux with Wine 9 (FSR 3 FG and OptiScaler) or Wine 8 (FSR 3 FG only):

Please always download the 'RADEON/ARC' package (for all GPUs: NVIDIA, AMD, INTEL). Supported GPUs may differ from Linux-specific Windows drivers. Works on Steam Deck.

2a. Installation (Windows):

For NVIDIA GPUs (RTX/GTX package):

Extract the zip archive into the Cyberpunk 2077 folder. Click Replace when prompted to replace libxess.dll.

or

Place 'dlss-enabler-upscaler.dll', 'dlss-enabler.dll', 'dlssg_to_fsr3_amd_is_better.dll', 'dxgi.dll', 'libxess.dll', 'nvngx-wrapper.dll' and 'nvngx.ini' in .../Cyberpunk 2077/bin/x64/.

Done. You can launch Cyberpunk 2077 and turn on framing in the game settings menu. To use OptiScaler, select 'DLSS' as your upskeleton.

—

For AMD or INTEL GPUs (RADEON/ARC package):

Extract the zip archive into the Cyberpunk 2077 folder. Click the Replace button when prompted to replace 'libxess.dll'.

or

Place '_nvngx.dll', 'dlss-enabler-upscaler.dll', 'dlss-enabler.dll', 'dlssg_to_fsr3_amd_is_better.dll', 'dxgi. dll', 'libxess.dll', 'nvapi64-proxy.dll', 'nvngx-wrapper.dll' and 'nvngx.ini' in the files .../Cyberpunk 2077/bin/x64/

Double-click the attached file 'DisableNvidiaSignatureChecks.reg' and click 'Yes'

when prompted to add information to the registry.

Done. You can launch Cyberpunk 2077 and turn on framing in the game settings menu. To use OptiScaler, select 'DLSS' as your upskeleton.

2b. Installation (Linux):

Extract the zip archive into the Cyberpunk 2077 folder. Click the Replace button when prompted to replace 'libxess.dll'.

or

Place '_nvngx.dll', 'dlss-enabler-upscaler.dll', 'dlss-enabler.dll', 'dlssg_to_fsr3_amd_is_better.dll', 'dxgi. dll', 'libxess.dll', 'nvapi64-proxy.dll', 'nvngx-wrapper.dll' and 'nvngx.ini' in the files .../Cyberpunk 2077/bin/x64/

Add values from the attached file 'DisableNvidiaSignatureChecks.reg' to the registry. You can use regedit from Protontricks:

- in the terminal run $ protontricks 1091500 regedit

,

- press 'registry' and select 'Import Registry File'

- search and select 'DisableNvidiaSignatureChecks.reg' - you should see a confirmation message that the records have been added.

Add the environment variable WINEDLLOVERRIDES="version,dxgi=n,b" to Wine.

Done. You can launch Cyberpunk 2077 and turn on framing in the game settings menu. To use OptiScaler, select 'DLSS' as your upskeleton.

3. Uninstallation:

To remove mods, delete the above files (except libxess.dll, which is needed by the game even without this mod) from the game folder. For AMD and INTEL GPU (Windows) and Linux, please double-click on 'RestoreNvidiaSignatureChecks.reg' and click 'Yes'.

If you want to return to XeSS 1.2, you can download it here: https://github.com/intel/xess/releases/tag/v1.2.0.

4. Make sure you have deleted all files from other FSR 3 FG mods:

Please remove dlssg-to-fsr3from Nukem' a, LukeFZ's FSR2FSR3 or Uniscaler's, or older versions of DLSS Enabler and any dependencies for these mods before installing this mod to avoid conflicts if possible. Especially fixes and improvements to improve compatibility with dlssg-to-fsr3 can prevent this mode from connecting to your game or cause unnecessary warnings in your log.

5. CET and RED4ext compatibility:

This mod is fully compatible with Cyber Engine Tweaks (CET), RED4ext, redscript and probably with any other known mods (or REDmods) that do not alter the game's graphical fairing and are available on Nexus. No additional tweets are needed.

6. Compatible with ReShade:

This mod is fully compatible with ReShade and most ReShade effects. To install this mod in ReShade, please follow the instructions below.

Setting the mod to the game that has ReShade installed:

Go to the folder '.../Cyberpunk 2077/bin/x64/' and rename 'dxgi.dll' to 'd3d12.dll'.

Install this mod for your Cyberpunk 2077.

Done.

Install ReShade on the game that has this mod installed:

Navigate to '.../Cyberpunk 2077/bin/x64/' and rename 'dxgi.dll' to 'dxgi_backup.dll'.

Install ReShade for your Cyberpunk 2077.

Rename the new file 'dxgi.dll' in folder '.../Cyberpunk 2077/bin/x64/' to 'd3d12.dll'.

Rename 'dxgi_backup.dll' again to 'dxgi.dll'.

Done.

7. Usage:

FSR 3 Frame Generation:

FSR 3 Frame Gen for Cyberpunk - DLSS Enabler 2077 Edition is designed to be as maintenance-free as possible. You install it, turn on the FSR 3 FG and/or the upskeiler of your choice in Cyberpunk 2077, then forget and enjoy the game.

Upscalers (DLSS, FSR 2.1.2, FSR 2.2.1, XeSS 1.3 - OptiScaler):

This mod adds Nitec's OptiScaler to the game, which can be enabled by selecting 'DLSS' from the game's graphics settings menu. OptiScaler allows you to replace the DLSS with any upskeleton of your choice (FSR 2.1.2, FSR 2.2.1 or XeSS 1.3).

To open the OptiScaler window, press the Home key on your keyboard while in the game (not in the game menu or pause menu). In the window you can change the settings of OptiScaler (select an upskeleton to replace the DLSS, enable SuperSampling and others). After changing (or missing) the settings, click on the "Save INI" button and press Home again to close the window. You can also customize your OptiScaler settings by editing the 'nvngx.ini' file in the folder'.../Cyberpunk 2077/bin/x64/'.

Mod also updates your game's XeSS to version 1.3. You can access it through the game's graphics settings menu (select 'Intel Xe SuperSampling 1.2') or through OptiScaler (select 'DLSS' from the game's graphics settings menu and make sure 'XeSS' is selected in the OptiScaler window).

Here you will find a table that compares OptiScaler, upskeletons, and their presets in terms of scaling factors.

You can change the OptiScaler scaling factors for different presets using the Quality Overrides option.

For more information about OptiScaler, documentation, and support, visit its github page or join the DLSS2FSR.

8. Troubleshooting - Troubleshooting any mod issues:

FSR 3 Frame Generation Ghosting:

You can use FrameGen Ghosting 'Fix' to eliminate the specter of generating frames while driving. This mod also offers some options to reduce ghosts when walking.

General Troubleshooting:

If you're having trouble (the game is crashing all the time, you can't turn on framing and/or OptiScaler or anything else), add '—dlss-debug=extra —dlss-logging=on' to the game's launch arguments, and then start the game until the problem occurs.

Then, please go to the folder '.../Cyberpunk 2077/bin/x64/', open the file 'dlss-enabler.log' and contact me here on the Nexus fashion page, on the forum or on the DLSS2FSR disk server and send/paste your log file so I can check it - so we'll fix your problems as quickly as possible.

For more information on available resolution and/or other launch arguments, please refer to the DLSS Enabler page in the Nexus.

Known Issues:

Problem: Unable to open/close CET overlays after opening OptiScaler window.

Solution: Please press 'Insert' to close OptiScaler. If you still cannot open/close CET overlays after closing the tool window, please let us know.