Updating the power grid

Description.

This section provides a general update of all previous modes, including switchgear and substations.

!!! The 6MW and 14MW vanilla lines do not connect correctly because of incorrect cable numbers, waiting for the correction from 3division. Mirror buildings also do not function properly.

Key features.

All cables connect automatically thanks to the new game mechanics. Deleted helper and duplicate objects.

All objects are compatible with each other and are universal.

Towers can be placed on any type of terrain.

Optimization has been greatly improved.

A lot of minor fixes and visual improvements.

Objects are still adapted to a certain number of power line circuits, and if you connect an object to a cable with a different number of circuits, the wires may not connect properly, but it will not affect the game functionality of the object.

All objects from previous mods can be replaced and their distribution stopped (old mods are available in the workshop).

[list].

Contents

20kV single-loop input

20 kV tapping, double-loop

20 kV Single Circuit Transmission Line

Connection of circuits from 20 kV two-circuit power lines

20kV Dual Circuit Power Line Connector

110 kV downwards single chain

110 kV tap, duplex circuit

110 kV Single Circuit Transmission

Diversion from two-circuit 110 kV power line

110 kV Dual Circuit Power Line Connector

Connectors for 110 kV four-circuit power lines

110 kV substation with single-circuit air entry (4.6 MW and 10 MW)

110 kV substation with two-circuit air inlet (any power)

110 kV substations with one cable input

110 kV substation with two cable entry points

Additional information.

Input - in this case connecting an overhead transmission line to a cable transmission line. Diversion - connection of the transmission line to the main transmission line and separation of the transmission line to take power from this line; 110 kV diversion is duplicated in accordance with the project No. 3.407-94. Divider - splitting a multicircuit transmission line into separate lines with fewer circuits (in this case 1 x 2 = 2 x 1 or 1 x 4 = 2 + 1 + 1), allowing the power to be distributed from one line to two/three other transmission lines. The substation is an open main lowering substation of 110/20 kV, the typical project is 407-3-191. a dead-end structure, where high voltage is converted to medium. The medium voltage output is compatible with both air and cable lines (multiple outputs can be selected). Large air intake substations have one connection for two-circuit overhead lines and two connections for single-circuit overhead lines (optional).

List of related equipment

TRANSFORMER TDN10000/110 DISCONNECTOR RND3-2-110/630-1000 DISCONNECTOR RLND-1-10 DISCONNECTOR OD3-110M/630-1000 KZ K3-110MW Valve Holder RVS-110 Earthing Reactor ZROM-300/10 Transformer TM-650 -10 auxiliary transformer TM-63/6-10 portal UO-110-L2/3 corresponding A10-1, US110-7, US110-8, UO-110